|
Firstly the grille needs to be removed from the car. Remove the top 3 screws from the plastic upper part of the
grille. In the lower part of the grille are some plastic catches, these have a small plastic lever that is pushed to one side to release the
grille from the car. Pull the grille forward and remove the headlight washer pipe work from the grille |
 |
With the grille removed you can see the path that the cooler air will take |
 |
The removed grille |
 |
At the end of the grille the "plastic lattice" is blanked off. If the blanking is removed the air will travel
into the air filter area much better |
 |
Drill the plastic where you want the ends of the slots... |
 |
...and take a hacksaw and remove the material between each hole. Once the material has been removed you might
want to run over the area with a file to tidy things up |
|
Job done, simply refit grille! |